FPGA Breakout Board – Lattice MachXO2 7000HE

The breakout board maps all available FPGA pins (except power and ground) on to the pin header connectors. The user's design has a full control over any operation mode of the FPGA. The breakout board may be installed both standalone or directly on the host PCB via sockets/mouting holes.

The breakout board supports all types of in-system configuration and also provides the separate JTAG Port.

The breakout board supports all ranges of the 7000 HE power inputs.

The board has two independent clock oscillators. System clock oscillator provides the FPGA reference clock frequency. The second clock oscillator may be used to serve special applications and provides external clock frequency. The desirable frequencies of both oscillators may be selected during the ordering.

The pin header connectors are routed in 0.1" grid, so it will be easy to connect the board either to the prototyping PCB plate or place it on the separate PCB appropriately.